CAN bus pressure transmitters
Pressure transmitter with CAN bus signal output
The CAN bus pressure transmitter contains only a few active components: a stainless steel membrane, the sensor element, a CMOS ASIC for calibration and storage of the calibration values, for signal processing and CAN-BUS operation, a microcontroller and some standard components.
The sensor is electronically calibrated and the data is stored digitally. This ensures good long-term stability and accuracy of the pressure transmitter with CAN bus signal output.
{jd_file file==101}
{jd_file file==105}
{jd_file file==102}
DS-CAN-01 (Druck)
DS-CAN-01 Pressure transmitter CAN bus
Pressure transmitter DS-CAN-01 (CANopen, pressure measuring cell)
Product features
- Sensor cell based on a stainless steel diaphragm (without intermediate medium) with piezoresistive bridge circuit of polysilicon
- integrated sensor signal processing (CMOS technology)
- media compatible with hydraulic oil, brake fluid, diesel, petrol, natural gas, compressed air, etc.
- Pressure ranges from 2 to 4000 bar (Si on stainless steel), from -1 bar to 2 bar (Si)
Technical specifications
- Pressure type: relative pressure against ambient pressure or against internal atmosphere
- Measurement resolution: 10 Bit
- Measurement accuracy: Class 0.5 at RT
- Total error: < 1,5 % F.S. at -10 °C to +80 °C
- Measuring grid from 5 ms
- CAN protocol: CANopen 2.0 A
- Physical Layer: according to DIN 11898
The pneumatic or hydraulic sealing is done by means of standard flat seals or O-rings. (According to DIN) The permissible torque when tightening is 25 Nm
All parts in contact with the measuring medium are made of the following materials:
- bis 500 bar X 5 CrNi1810 SUS 304 - 50 Mpa
- bis 2000 bar X 5 CrNiCuNb 174 SUS 630 - 100 Mpa
No O-ring, no silicone oil
DTS-CAN-01 (pressure/temperature)
DTS-CAN-01 Pressure and Temperature Transmitter CAN Bus
This product is no longer available. If required we are available for you by telephone under:
+49 3681 86-7300 or by e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Transmitter for measuring pressure and temperature with CAN-BUS interface.
Product features
- Measuring grid from 5 ms
- Measurement resolution: 10 Bit
- CAN protocol: CANopen 2.0 A
- Physical Layer: according to DIN 11898
Technical specifications
- Pressure measurement
- Sensor cell based on a stainless steel diaphragm (without intermediate medium) with piezoresistive bridge circuit of polysilicon
- integrated sensor signal processing (CMOS technology)
- media compatible with hydraulic oil, brake fluid, diesel, petrol, natural gas, compressed air, etc.
- Pressure ranges from 2 to 4000 bar (Si on stainless steel) Measurement of relative pressure against ambient pressure or against internal atmosphere
- Measurement accuracy: Class 0.5 at RT
- Total error: < 1,5 % F.S. at -10 °C to +80 °C
- Temperature measurement:
- Thermistor 50 kOhm @ 37 °C, linearisiert
- Measuring range -10...80 °C
- Measuring accuracy +/- 0,8 K
All parts in contact with the measuring medium are made of the following materials:
- up to 500 bar X 5 CrNi1810 SUS 304 - 50 Mpa
- up to 2000 bar X 5 CrNiCuNb 174 SUS 630 - 100 Mpa
No O-ring, no silicone oil
Application
- hydraulics
- pneumatics
- environmental technology
- process technology
- air-conditioning technology
- semiconductor technology
- automotive engineering
- agricultural machinery technology
- heating systems
- industrial robots
variable pressure measuring ranges
Standard pressure range in kPa, non-standard ranges available on request
- 0 - 500
- 0 - 1.000
- 0 - 2.000
- 0 - 5.000
- 0 - 10.000
- 0 - 35.000
- 0 - 50.000
- 0 - 70.000
- 0 - 200.000
- 0 - 400.000
Environmental conditions
- Operating temperature range: -40 °C to +80 °C
- Storage temperature range: -20 °C to +120 °C
- Shock resistance: 30 g, duration:14 ms at RT
- Vibration resistance: 10 g at 20-1000 Hz
- EMV and ESD tested according to: EN 50082-1 and EN 50082-2
Prices and availability
For an individual offer for our CAN bus pressure transmitters, please contact us by phone at
+49-6251-8462-0 , by email under This email address is being protected from spambots. You need JavaScript enabled to view it. or by using our contact form.
Our experienced sales team is looking forward to your enquiry!
