Menu

CAN bus pressure transmitters

Pressure transmitter with CAN bus signal output

Stainless Steel CAN Bus Pressure transmitter

The CAN bus pressure transmitter contains only a few active components: a stainless steel membrane, the sensor element, a CMOS ASIC for calibration and storage of the calibration values, for signal processing and CAN-BUS operation, a microcontroller and some standard components.

The sensor is electronically calibrated and the data is stored digitally. This ensures good long-term stability and accuracy of the pressure transmitter with CAN bus signal output.

CAN bus sensor overview

DS-CAN-01 manual

DS-CAN-01 data sheet

{jd_file file==101}

{jd_file file==105}

DTS-CAN-01 data sheet

{jd_file file==102}

DS-CAN-01 (Druck)

DS-CAN-01 Pressure transmitter CAN bus

Pressure transmitter DS-CAN-01 (CANopen, pressure measuring cell)

Product features

  • Sensor cell based on a stainless steel diaphragm (without intermediate medium) with piezoresistive bridge circuit of polysilicon
  • integrated sensor signal processing (CMOS technology)
  • media compatible with hydraulic oil, brake fluid, diesel, petrol, natural gas, compressed air, etc.
  • Pressure ranges from 2 to 4000 bar (Si on stainless steel), from -1 bar to 2 bar (Si)

Technical specifications

  • Pressure type: relative pressure against ambient pressure or against internal atmosphere
  • Measurement resolution: 10 Bit
  • Measurement accuracy: Class 0.5 at RT
  • Total error: < 1,5 % F.S. at -10 °C to +80 °C
  • Measuring grid from 5 ms
  • CAN protocol: CANopen 2.0 A
  • Physical Layer: according to DIN 11898

The pneumatic or hydraulic sealing is done by means of standard flat seals or O-rings. (According to DIN) The permissible torque when tightening is 25 Nm

All parts in contact with the measuring medium are made of the following materials:
- bis 500 bar X 5 CrNi1810 SUS 304 - 50 Mpa
- bis 2000 bar X 5 CrNiCuNb 174 SUS 630 - 100 Mpa
No O-ring, no silicone oil

DTS-CAN-01 (pressure/temperature)

DTS-CAN-01  Pressure and Temperature Transmitter CAN Bus

This product is no longer available. If required we are available for you by telephone under:
+49 3681 86-7300 or by e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

CAN-Bus Drucksensor Temperatursensor DTS-CAN-01

Transmitter for measuring pressure and temperature with CAN-BUS interface.

Product features

  • Measuring grid from 5 ms
  • Measurement resolution: 10 Bit
  • CAN protocol: CANopen 2.0 A
  • Physical Layer: according to DIN 11898

Technical specifications

  • Pressure measurement
    • Sensor cell based on a stainless steel diaphragm (without intermediate medium) with piezoresistive bridge circuit of polysilicon
    • integrated sensor signal processing (CMOS technology)
    • media compatible with hydraulic oil, brake fluid, diesel, petrol, natural gas, compressed air, etc.
    • Pressure ranges from 2 to 4000 bar (Si on stainless steel) Measurement of relative pressure against ambient pressure or against internal atmosphere
    • Measurement accuracy: Class 0.5 at RT
    • Total error: < 1,5 % F.S. at -10 °C to +80 °C
  • Temperature measurement:
    • Thermistor 50 kOhm @ 37 °C, linearisiert
    • Measuring range -10...80 °C
    • Measuring accuracy +/- 0,8 K

All parts in contact with the measuring medium are made of the following materials:
-  up to 500 bar X 5 CrNi1810 SUS 304 - 50 Mpa
- up to 2000 bar X 5 CrNiCuNb 174 SUS 630 - 100 Mpa
No O-ring, no silicone oil

Application

  • hydraulics
  • pneumatics
  • environmental technology
  • process technology
  • air-conditioning technology
  • semiconductor technology
  • automotive engineering
  • agricultural machinery technology
  • heating systems
  • industrial robots

variable pressure measuring ranges

Standard pressure range in kPa, non-standard ranges available on request

  • 0 - 500
  • 0 - 1.000
  • 0 - 2.000
  • 0 - 5.000
  • 0 - 10.000
  • 0 - 35.000
  • 0 - 50.000
  • 0 - 70.000
  • 0 - 200.000
  • 0 - 400.000

Environmental conditions

  • Operating temperature range: -40 °C to +80 °C
  • Storage temperature range: -20 °C to +120 °C
  • Shock resistance: 30 g, duration:14 ms at RT
  • Vibration resistance: 10 g at 20-1000 Hz
  • EMV and ESD tested according to: EN 50082-1 and EN 50082-2
We are pleased to provide you with the EDS file for our CANopen bus sensors.

 
Prices and availability

For an individual offer for our CAN bus pressure transmitters, please contact us by phone at
+49 (0) 3681 86-7300 , by email under This email address is being protected from spambots. You need JavaScript enabled to view it. or by using our contact form.
Our experienced sales team is looking forward to your enquiry!

Quotation, price information and ordering

Many of our products can be adapted to their fields of application and use individually. Besides the individual factory-set parameters, such as the different measuring ranges, the surrounding media and electrical connections and accessories are also important aspects for the offer.
Therefore, let us advise you professionally and without any obligation!
Our experienced sales staff will be pleased to prepare a suitable offer for you quickly.

Your contact options

Business times:
Monday - Friday 8:00 - 17:00 (CET)

Email: info@zila.de

Phone: +49 3681 86-7300

Open contact form